The TRENDCOVER Leather brings the refined look of leather into a clean, cylindrical form that resembles an interior decor object more than a conventional planter. The subtle embossed surface, calm tones, and discreet industrial style add depth without competing with the plant, allowing the greenery to naturally integrate into a modern home, office, or hospitality space.
2 sizes2 Leather shadesOriginal LECHUZA Systemremovable plant linerRecessed handlesIndoor use
Ø23 × 26.5 / Ø32 × 33W × H cm
1.4 / 4 LWater reservoir
5.5 / 13 LPlant volume
40 / 60 cmMaximum plant height
In TRENDCOVER, the numbers 23 and 32 correspond to the outer diameter in centimeters.
LECHUZA Classic System
Self-watering hidden inside a decorative cover
The self-watering system is located in the removable plant liner. The provided LECHUZA-PON covers the separation base and transfers moisture to the roots, while the filling shaft directs water into the reservoir and the MIN/MAX indicator makes the level immediately visible.
The plant liner is lifted by the recessed handles for easier planting, transport, and cleaning.
For the first approximately 12 weeks, water from the top until the roots reach the moisture zone.
After rooting, fill the water reservoir from the filling shaft up to the MAX.
When the indicator reaches MIN, the dry phase follows, which the particular plant needs before the next filling.
Schematic section TRENDCOVER Leather · the watering system remains inside the removable plant liner.
1Leather coverEmbossed synthetic surface
2Plant linerRemovable, with retractable handles
3LECHUZA-PONIrrigation layer under the substrate
4Water reservoir1.4 L or 4 L
5filling shaftGuides water to the water reservoir
6Water-level indicatorMIN / MAX indications
01
Industrial character, more refined presence
The embossed leather-look surface adds materiality and depth without the hardness of a glossy or metallic finish.
02
The plant liner lifts out as one piece
The plant liner is lifted by the handles, so that transplanting, water reservoir inspection, and cleaning are made easier.
03
Changes appearance without new transplanting
The planted plant liner can be transferred to a TRENDCOVER Felt or Cork of the same size, changing the look without disturbing the roots.
TRENDCOVER Leather 23 or 32?
The selection is based on the root ball, the height of the plant, and the space where the arrangement will be placed.
TRENDCOVER Leather 23
More compact
Outer dimensions
Ø23 × 26.5 cm
Water reservoir
1.4 L
Plant volume
5.5 L
plant liner approx.
Ø19.5 cm
Planting depth
17.5 cm
Maximum plant height
40 cm
TRENDCOVER Leather 32
More spacious
Outer dimensions
Ø32 × 33 cm
Water reservoir
4 L
Plant volume
13 L
plant liner approx.
Ø27.5 cm
Planting depth
23 cm
Maximum plant height
60 cm
From planting to autonomy in four steps
The correct initial period allows the roots to gradually reach the moisture zone.
01 · Assemble the system
Insert the separator base, filling shaft and water-level indicator into the plant liner.
02 · Add PON and plant
Cover the base with the provided LECHUZA-PON, place the plant, and fill with suitable substrate.
03 · Insert the plant liner
Place the planted plant liner inside the outer cover, with the filling shaft and indicator accessible.
04 · Water in two stages
Initially water from above. After rooting, use the reservoir and follow the MIN/MAX indicators.
The Leather look
Leather look, without being real leather
The exterior surface is a synthetic leather imitation with an embossed texture. It provides the visual depth and tactile character of the leather look, without appearing as genuine leather.
Made in Germany
Lightweight, unbreakable construction
The TRENDCOVER is made in Germany. The plant liner is made from 100% recycled plastic and is fully recyclable.
Where each size fits
23Side table, console, spacious desk, or low piece of furniture, for a more discreet arrangement.
32Floor, large light corner, reception or commercial space, for a more intense presence.
IndoorBoth sizes are intended for indoor use and are placed on a stable, flat surface.
How to choose a plant
01Measure the root ball and compare it with a plant liner of Ø19.5 cm at 23 or Ø27.5 cm at 32.
02Combine the minimal form with an upright, bushy, or slightly trailing indoor plant.
03Maintain a maximum plant height of about 40 cm at 23 and 60 cm at 32.
04Take into account the final foliage spread, not just the current diameter of the root ball.
What the All-in-One Set includes
The TRENDCOVER Leather is delivered with the basic accessories needed for the Classic System.
TRENDCOVER LeatherOuter cover with an embossed leather look
Plant linerRemovable, with retractable handles
Classic SystemDivider base, filling shaft, and MIN/MAX indicator
LECHUZA-PONAmount for the irrigation layer
Not included the plant and the additional substrate needed to complete the planting.
Two Leather Shades
Both sizes are available in the same two color options.
Leather Cream
Leather Anthracite
The same form, in other textures
Choose a different surface or move the planted plant liner to a cover of the same size without replanting.
Soft textile look
TRENDCOVER Felt
The soft appearance of felt creates a calmer, warmer atmosphere and is available in Felt Dark Grey and Felt Light Grey.
Remove dust with a dry soft cloth and clean locally with a slightly damp cloth. Avoid soaking, hard brushes, abrasive sponges, and natural leather care products.
Change cover
Keep the same size
For transition from Leather to Felt or Cork, transfer the entire removable plant liner only to a TRENDCOVER of the same nominal size: 23 to 23 or 32 to 32.
!
Leather look for indoor use
The word Leather describes a synthetic embossed appearance, not natural leather. The TRENDCOVER Leather is recommended exclusively for indoor use: do not leave it exposed to rain, prolonged moisture, or standing water on the outer surface.
Frequently asked questions
What is the difference between the TRENDCOVER Leather 23 and 32?
The 23 has dimensions Ø23 × 26.5 cm, a 1.4 L water reservoir, a plant volume of 5.5 L, and a plant liner of approximately Ø19.5 cm. The 32 has dimensions Ø32 × 33 cm, a 4 L water reservoir, a plant volume of 13 L, and a plant liner of approximately Ø27.5 cm.
Is the outer surface made of real leather?
No. It is a synthetic surface with an embossed leather imitation. The name Leather describes its appearance and texture, not natural leather.
What does the All-in-One Set include?
It includes the TRENDCOVER Leather outer body, the removable plant liner with recessed handles, the separating base, the filling shaft, the water-level indicator, and LECHUZA-PON for the irrigation layer. The plant and additional substrate are not included.
Do I fill the reservoir immediately after planting?
No. For the first approximately 12 weeks, you water the substrate from above, until the roots reach the moisture zone. Then you fill from the filling shaft up to the MAX and follow the MIN indication and the appropriate dry phase of the plant.
Is the plant liner removable?
Yes. The plant liner is separate from the outer cover and has recessed handles, so it can be lifted out for planting, transport or cleaning.
Can I switch from Leather to Felt or Cork without replanting?
Yes. You can transfer the removable planted plant liner to a TRENDCOVER with a different finish, as long as it is the same size: 23 to 23 or 32 to 32.
Can it be used outdoors?
TRENDCOVER Leather is recommended for indoor use. It should not be left exposed to rain, prolonged moisture, or water on the embossed outer surface.