Clear acrylic supports for stems and shoots that lean or need subtle upward guidance. They offer light to medium support without visually dominating the planting.
8 mmThe available thickness
40–60 cmThree lengths available
Crystal ClearClear acrylic
1 pieceIn your chosen length
Targeted support
Keeps the stem in the right place, discreetly
The Acrylic Plant Stake is placed inside the substrate and acts as a fixed point for a soft tie or clip. It is suitable when a stem leans, a shoot needs better alignment or you want to reduce stress from the weight of the foliage.
For upright plants, orchids, Anthuriums, Alocasias and ornamental foliage.
The sharpened tip facilitates careful insertion into the substrate.
The clear acrylic remains visually discreet among the shoots.
Suitable for
Light to medium support of stems and shoots, with a soft tie or suitable clip.
It is not a climbing system
It does not replace a moss pole, trellis or other structural support for climbing plants.
01
Discreet appearance
The transparent surface is easily integrated into minimal plantings, without hiding the plant.
02
Support where needed
It creates a fixed point next to the stem or shoot that needs a better position.
03
Reusable
It is easy to clean and can be used again in a new plant or a different setup.
Selection guide
Choose a length based on the pot and the support point
All three available sizes are 8 mm thick. Their difference is only in the total length.
What to measure: the available depth into the substrate and the distance from its surface to the point of the shoot that needs support. Some of the stake stays inside the pot, so don't just choose from the overall height of the plant.
40
40 cm
For standard indoor pots
Thickness
8 mm
Color
Transparent
Quantity
1 pc.
50
50 cm
For larger plants and a higher support point
Thickness
8 mm
Color
Transparent
Quantity
1 pc.
60
60 cm
For taller plants or deeper pots
Thickness
8 mm
Color
Transparent
Quantity
1 pc.
Placement
Three simple moves
Place the stake carefully and fix the shoot without pressing it.
01Remove the protective film
If there is a film on the surface, remove it before use.
02Insert into the substrate
Gradually press the sharpened tip close to the stem, without sudden force.
03Fasten gently
Use a soft tie or suitable clip, leaving space so that the stem is not pressed.
In the package
1 Acrylic Plant Stake
8 mm thick, transparent, in the length of 40, 50 or 60 cm you choose.
Not included
Plant and fastening accessories
Pot, plant, ties, clips and other accessories available separately.
Complete the support
Choose how you will fix the stem
The Acrylic Plant Stake creates the stable support point. Choose clips for quick application or Plant Tie when you want to adjust the fastening length yourself.
5 pieces
Plant Clips
For quick, reusable stem retention on a thin support.
Short answers about choosing, using and caring for the product.
01How do I choose between 40, 50 and 60 cm?
Calculate the part that will go inside the substrate and the height from the surface of the pot to the point you want to support. The sum gives you the appropriate total length.
02Can I use this instead of a moss pole or trellis?
No. The Acrylic Plant Stake supports individual stems and shoots. It does not create a rooting surface and is not a structural system for climbing plants.
03How is it cleaned?
Wipe it with a soft, damp cloth. If delivered with a protective film, remove it before first use to reveal the transparent surface.
04Is a tie or clip included?
No. The package includes an Acrylic Plant Stake in the length of your choice. Ties and clips are available separately.
