Name: Plastic liner for Hydroculture
Brand: LENI DESIGN
SKU: 6INZL1211
Price: 8.0 EUR
Availability: InStock

This store requires javascript to be enabled for some features to work correctly.

HOME

PLANTS

Cacti & Succulents
Indoor Plants
- All Plants
- Philodendron
- Calathea
- Sansevieria
- Peperomia
- Hoya
- Ferns
- Carnivorous Plants
Outdoor Plants
- All
- Shrubs
- Acer®
- Alstroemeria®
- Hydrangeas®
- Tropical Plants
- Fruit Snacks®
- Grasses®
- Climbing Plants
- Conifers
New varieties
Roses
Baby Plants
Mystery Box®

PLANT FINDER

SPECIAL COLLECTIONS

HYDROCULTURE

GARDENING

Pots and Planters

PLANT CARE

GIFT CARD

BLOG

HOME
PLANTS
- Cacti & Succulents
- Indoor Plants
  - All Plants
  - Philodendron
  - Calathea
  - Sansevieria
  - Peperomia
  - Hoya
  - Ferns
  - Carnivorous Plants
- Outdoor Plants
  - All
  - Shrubs
  - Acer®
  - Alstroemeria®
  - Hydrangeas®
  - Tropical Plants
  - Fruit Snacks®
  - Grasses®
  - Climbing Plants
  - Conifers
- New varieties
- Roses
- Baby Plants
- Mystery Box®
PLANT FINDER
- Indoor Plants
- Outdoor Plants
SPECIAL COLLECTIONS
HYDROCULTURE
GARDENING
- Shop all gardening
- Lawns
  - Grass seed
  - Rolled turf
Pots and Planters
- Globee®
- Mica® Pots
- Capi® Pots
- Pots
- Lechuza
- Orchid Pots
- Terraneo
- Plantopia Baskets
PLANT CARE
GIFT CARD
BLOG

HYDROCULTURE · CLEAR LINER · 11 SIZES

Plastic liner for Hydroculture

Turns a non-watertight planter into a controlled hydroculture reservoir.

Sizes: 10 × 9 – 45 × 35 cm · Colour: Clear

11 options
Flexible fit
Height can be trimmed
Reusable

Give hydroculture function to the planter you genuinely want to display. Clear and flexible, the Plastic liner fits inside non-watertight planters, cachepots or baskets to create a clean, controlled water reservoir without changing their outer appearance. With 11 sizes from 10 × 9 to 45 × 35 cm, it supports anything from a compact setup to a larger arrangement when paired with a Hydroponic Pot, LECA and the right water-level indicator.

The look outside · control inside

The discreet part that creates the reservoir

The liner follows the inside of the outer planter and holds the water reservoir below. The Hydroponic Pot with LECA and the correct water-level indicator sit inside it.

Keep the outer planter that suits your space.
The clear material allows discreet visual inspection when the inner system is removed.
Eleven dimensions cover compact cachepots through to larger arrangements.

The liner is not a cultivation pot. It forms the water reservoir and works with a Hydroponic Pot, LECA and compatible indicator.

Cross-section diagram. The liner forms the watertight reservoir inside the outer planter; it does not replace the Hydroponic Pot or water-level indicator.

Freedom of appearance

Use a cachepot, basket or planter that is not watertight by itself.

Controlled reservoir

Water is held below and the level is read with the appropriate indicator.

A size without compromise

Eleven options help avoid sharp folds and an unstable fit.

Included

1 Plastic liner

One clear, flexible liner in the size selected from the 11 available variants.

Not included

The remaining system components

Outer planter, Hydroponic Pot, LECA, water-level indicator and plant are sold separately.

Ready compatible combinations

Build the right system in one choice

Choose the available combination that fits your planter and add the liner, outer planter and matching indicator together at a bundle price.

Sizing11 dimensions with verified codesChoose from the planter’s internal dimension.

11 verified options

Find the size that fits correctly

Measure the internal diameter or width and the usable height of the planter. The liner should fit without sharp folds or forced pressure.

10 × 9 cmSKU · 6INZL1009

12 × 11 cmSKU · 6INZL1211

15 × 15 cmSKU · 6INZL1515

17 × 16 cmSKU · 6INZL1716

19 × 18 cmSKU · 6INZL1918

21 × 16 cmSKU · 6INZL2116

25 × 15 cmSKU · H9790

30 × 22 cmSKU · H9791

35 × 25 cmSKU · H9792

40 × 30 cmSKU · H9793

45 × 35 cmSKU · H9794

Before choosing: Nominal dimensions are diameter × height. Check the planter’s actual internal space and leave room for the Hydroponic Pot and indicator.

InstallationMeasure, test and trim carefullyConfirm the fit first, then trim if needed.

A correct fit from the start

Four steps without unnecessary trial and error

The correct choice is based on the planter’s internal dimensions and the space required by the complete hydroculture setup.

Measure the inside

Record the internal diameter or width and usable height, not only the planter’s external dimensions.

Test the fit

Place the liner in empty. It should sit securely without sharp folds or pressure at the rim.

Trim only if needed

Carefully reduce the upper edge while leaving enough height for the reservoir and indicator.

Build the system

Add the Hydroponic Pot, LECA and matching indicator. For normal care, refill slowly to OPT.

Trim once, after confirming the fit

A trimmed edge cannot be restored. Mark it evenly, use a suitable cutting tool and make sure no sharp edges remain.

CareCleaning, inspection and correct water levelOPT is the normal refill target.

A clean reservoir that works reliably

Check before every reuse

The liner works correctly when it is clean, undamaged and fitted without folds compressed by the weight of the system.

Rinse with lukewarm water

Remove salts, LECA dust and organic residue with a soft cloth or sponge.

Inspect the entire surface

Replace it if you find a puncture, deep scratch or deformation that affects the fit.

Protect it from sharp edges

Do not force it against sharp planter edges or use hard tools for cleaning.

The water-level reading remains part of the system

Use a correctly sized indicator. For normal care, aim for OPT; MAX is a temporary level, not a permanent rule.

FAQ

Frequently asked questions

The answers you need before choosing a size and setting up the system.

01What exactly does the Plastic liner do?

It sits inside a non-watertight planter or cachepot and forms the controlled water reservoir for a hydroculture setup.

02How do I choose the right size?

Measure the internal diameter or width and usable height. Choose a liner that fits without sharp folding and leaves room for the Hydroponic Pot and indicator.

03Can I trim it to the height I need?

Yes, after confirming the fit. Mark an even line, use a suitable tool and leave enough height for the water reservoir.

04Will it make the outer planter watertight?

An undamaged liner forms a watertight internal reservoir when fitted correctly. Check for punctures, deep scratches and pressure from sharp edges.

05Can I plant directly into the liner?

That is not the recommended use. The liner forms the reservoir; roots and LECA should be held by a suitable Hydroponic Pot.

06What is included?

One Plastic liner in the selected size. Outer planter, Hydroponic Pot, LECA, water-level indicator and plant are sold separately.

07Should I refill the reservoir to MAX every time?

No. For normal care, refill slowly to OPT and allow the level to fall according to the plant’s water use. MAX is only for temporary use.

08Can it be cleaned and reused?

Yes, provided it remains undamaged. Rinse with lukewarm water and a soft cloth, remove residue and inspect it carefully before reuse.

Cart (0)

Plastic liner for Hydroculture

Plastic liner for Hydroculture

Plastic liner for Hydroculture

The discreet part that creates the reservoir

Freedom of appearance

Controlled reservoir

A size without compromise

1 Plastic liner

The remaining system components

Build the right system in one choice

Find the size that fits correctly

Four steps without unnecessary trial and error

Measure the inside

Test the fit

Trim only if needed

Build the system

Check before every reuse

Frequently asked questions

Plastic liner for Hydroculture — Care & Tips

Recently Viewed

Plastic liner for Hydroculture

Plastic liner for Hydroculture

Plastic liner for Hydroculture

The discreet part that creates the reservoir

Freedom of appearance

Controlled reservoir

A size without compromise

1 Plastic liner

The remaining system components

Measure the inside

Test the fit

Trim only if needed

Build the system

Water level indicator II

Hydroponic Pots

LECA for Hydroculture

Assembly guide

Frequently asked questions

Plastic liner for Hydroculture — Care & Tips

Recently Viewed