A ready-to-use set with a support stick and transparent Stem Support Leaf Hook, designed to lift and hold heavy or drooping leaves without tight ties around the petioles. Choose the height and diameter combination that places the hook where support is needed.
2-part setSupport stick and leaf hook
3 optionsHeights of 20, 40 and 60 cm
Ø45–127 mmThree actual hook diameters
Leaf supportFor leaves, not climbing
How the set works
Height from the stick, gentle support from the hook
The two parts work together to position support where the petioles need it, without turning the product into a trellis or climbing system.
The support stick goes into the growing medium and sets the support height.
The leaf hook slides onto the stick and gently holds the group of petioles.
The transparent acrylic hook stays discreet among the leaves.
01
Support stick
Goes into the growing medium and holds the hook at the selected height: 20, 40 or 60 cm.
02
Stem Support Leaf Hook
Its arms cradle the petioles and help keep heavy or drooping leaves in a controlled position.
01
Support in the right place
The stick lets you position the hook at the height where the petioles begin to lean.
02
No tight ties
The leaves rest on the hook’s arms instead of being tied tightly to a support.
03
A clean, discreet appearance
The transparent acrylic hook is visually unobtrusive among Alocasia, Anthurium and other large-leaved plants.
Selection guide
Measure the support height and the group of petioles
Measure from the surface of the growing medium to the point where you want the petioles to rest, then estimate the diameter of the group the hook will surround at that height.
Height and diameter are a fixed pair in each option. Check both measurements before choosing. The hook should cradle the petioles naturally, without pressing them towards the centre.
20cm
20 cm – Ø45 mm
Low placement
Stick height
20 cm
Hook diameter
45 mm
Suitable for
Small group of petioles
40cm
40 cm – Ø100 mm
Medium placement
Stick height
40 cm
Hook diameter
100 mm
Suitable for
Medium group of petioles
60cm
60 cm – Ø127 mm
High placement
Stick height
60 cm
Hook diameter
127 mm
Suitable for
Larger group of petioles
These are the three available set options; stick height and hook diameter cannot be selected independently.
Included
1 stick + 1 leaf hook
One support stick at the selected height and one transparent acrylic Stem Support Leaf Hook in the matching diameter.
Not included
Plant and pot
The product is the two-part support set. The plant, pot and other accessories shown are sold separately.
Installation
Four steps for correct support
Fit the set before the petioles bend sharply and adjust its position as the plant grows.
01 · Remove the protective film
Start on the side of the acrylic hook opposite the printed logo.
02 · Position the stick
Press it carefully into the growing medium where you want to support the leaves.
03 · Adjust the hook
Slide the leaf hook onto the stick and position it at the right height.
04 · Rest the petioles on the hook
Guide them gently onto the arms without pressure, and check their position as they grow.
Use and care
Keep the hook clean and check its position regularly
Gentle care maintains the acrylic’s clarity, while regular adjustment leaves room for petioles as their position changes.
A soft, damp cloth
Clean the hook when needed, without harsh sponges or abrasive cleaners.
Check as the plant grows
Make sure no petiole is under pressure and adjust the hook’s position when needed.
Gentle placement
Do not force the stick against thick roots or force bent petioles to straighten suddenly.
Reuse
Remove, clean and refit the set when the support point or plant changes.
Leaf support—not a climbing system
The Hook Stick Set does not replace a moss pole, trellis or other structural support for climbing plants. Its purpose is to position and hold leaf hooks for heavy or drooping leaves.
Frequently asked questions
Short answers about choosing, using and caring for the product.
01Which size should I choose?
First check the height above the growing medium where the petioles need support, then how much space their group occupies at that point. Available combinations are 20 cm–Ø45 mm, 40 cm–Ø100 mm and 60 cm–Ø127 mm.
02What exactly does each option include?
One support stick at the selected height and one Stem Support Leaf Hook in the matching diameter. Plant and pot are not included.
03Is it suitable for climbing plants?
It can be used on a climbing plant only to support particular leaves. It does not act as a moss pole, trellis or support for upward growth.
04Do I need to remove protective film?
Yes. Remove the protective film from the side of the acrylic hook opposite the printed logo before use.