A dedicated dripper that makes watering a Front Opening moss pole a neat, repeatable task. It distributes water quickly from the top into the moss column, helping moisture reach lower down where active roots develop.
Rapid FlowFast watering from the top
S–XLA Dripper for each pole size
Anti-ClogInternal geometry for consistent flow
PETGFor frequent contact with water and fertiliser
Moss needs consistency, not guesswork
Good watering starts at the top
Hand watering often wets the top more than the lower sections of the pole. The Rapid Dripper fits onto the matching Front Opening moss pole and distributes the flow before water moves down through the material.
Fits directly onto the top, without adaptations.
Accepts water or correctly diluted liquid fertiliser.
The anti-clog geometry helps keep the flow reliable.
Water moves towards the lower parts of the moss column.
Rapid means fast flow. It is not a slow-release container and does not automatically keep the pole moist for days. You control moisture by deciding when and how much to fill it.
Schematic illustration of the flow. Actual speed depends on moisture, filling and the density of the material.
01
More even moisture
Flow starts across the full width of the top and continues downwards, instead of being confined to one point.
02
A predictable routine
Fill from one fixed point and check the moisture of the moss before deciding on the next application.
03
Feeding through the pole
Can also be used with correctly diluted liquid fertiliser, allowing nutrients to reach the roots inside the moss.
Matching without calculations
The same letter on the Dripper and moss pole
Front Opening poles do not have different closure positions. Simply choose the Dripper that exactly matches your pole size.
S
Rapid Dripper Sfor Front Opening pole SExact match
M
Rapid Dripper Mfor Front Opening pole MExact match
L
Rapid Dripper Lfor Front Opening pole LExact match
XL
Rapid Dripper XLfor Front Opening pole XLExact match
The size refers to compatibility with the pole—not the height of the plant.
CompatiblePlantScraper Front Opening · Prime Line
Use the same size: S, M, L or XL. It fits directly onto the top.
Not compatibleClassic Line, coco poles and other systems
The fitting is not universal and should not be chosen solely on the basis of a similar width.
Use in four steps
Position, fill, check
It is simple to use, but the result always depends on the actual moisture of the moss, not a fixed calendar.
01
Match the size
Make sure the Dripper and Front Opening pole have the same S, M, L or XL marking.
02
Place it on top
Fit it onto the pole without force or improvised modifications.
03
Fill with water or diluted fertiliser
If using fertiliser, follow the product dosage. Do not add concentrated solution.
04
Check before refilling
Wait for the fast flow to finish and check moisture at different points on the pole.
There is no single correct number of days between refills for every setup
Temperature, room humidity, light, pole size, filling density and root development affect drying speed. Refill when the moss starts to lose its even moisture, without keeping it permanently saturated.
Material
Durable PETG
Chosen for frequent contact with water and diluted fertiliser. Suitable for long-term use in indoor plant setups with consistent moisture.
Design
Anti-clog internal geometry
The water pathway is designed to support reliable flow. Regular rinsing removes fertiliser residue and mineral deposits before they affect operation.
Accessory care
Clear flow without complicated maintenance
A brief check from time to time is enough to keep the Dripper ready for the next application.
Rinse with clean water
Run clean water through it after fertiliser applications to prevent residue building up.
Check the flow
If the outflow becomes uneven or noticeably slower, rinse the channels before the next use.
Gentle handling
Do not use sharp tools in the holes, as they may alter the flow geometry.
In the pack
1 Moss Pole Rapid Dripper
Black PETG, in your chosen size: S, M, L or XL.
Not included
The rest of the Prime Line setup
Front Opening moss pole, sphagnum or other filling material, anchor, pot, growing medium, fertiliser and plant.
Front Opening set
Complete the setup—save 10%
Each offer combines a Rapid Dripper with the matching Front Opening moss pole in the same size. Choose the S, M, L or XL set and add both to your basket together.
The compatible moss pole
Front Opening · Prime Line
The Rapid Dripper is designed exclusively for PlantScraper Front Opening moss poles. Choose the same size for the pole and Dripper for an accurate fit and correct flow distribution.
Frequently asked questions
Short answers about choosing, using and caring for the product.
01Is it a slow-release system?
No. It is a Rapid Dripper: it empties relatively quickly and wets the moss from top to bottom. It does not act as a reservoir lasting several days or an automatic watering system.
02How often does it need filling?
There is no fixed frequency for every setup. Check moisture at more than one point in the moss and refill as it starts to dry. Season, temperature, size and roots inside the pole significantly affect the rate.
03Can I use liquid fertiliser?
Yes, with a correctly diluted solution following the fertiliser instructions. Periodically use clean water alone to reduce residue build-up.
04Does it fit Classic moss poles?
No. This Dripper is exclusively for Prime Line Front Opening moss poles. It is not compatible with the Classic Line, coco poles or moss poles from other manufacturers.
05Which size should I choose?
Exactly the same size as the Front Opening pole: S with S, M with M, L with L and XL with XL. Do not choose a different size based only on the external width.
06How is it cleaned?
Rinse with clean, lukewarm water and check that all channels flow freely. After fertiliser use, rinsing with clean water helps prevent residue build-up.