Water from outside, not through the leaves
The peripheral ring remains accessible even when the plant covers the top opening with dense or pendulous foliage.
This store requires javascript to be enabled for some features to work correctly.
Shipping within Greece only. This product cannot be shipped to your selected country.
Shipping within Greece only. This product cannot be shipped to your selected country.
The BOLA Color brings greenery to eye level with a clean, almost floating spherical form. The smooth upper part meets the thin horizontal grooves of the lower shell and creates a calm yet distinctive contrast, ideal for hanging plants that want to become part of the space's architecture.
In BOLA, the numbers 23 and 32 correspond to the outer diameter in centimeters. The maximum load refers to the entire hanging assembly, including the planter, plant liner, PON, substrate, plant, and water.
Between the smooth upper part and the grooved lower shell remains an open perimeter ring. From there, the water is directed to the reservoir, while the MIN/MAX indicator shows the available level. The removable plant liner keeps the planting separate and can be lifted when change or maintenance is needed.
The peripheral ring remains accessible even when the plant covers the top opening with dense or pendulous foliage.
The smooth matte surface on top and the fine grooves below give depth without visually weighing down the hanging composition.
The plant liner lifts out with the planting for easier repotting, inspection and system maintenance.
The choice depends on the available free space, the root ball, and the permissible total load of the suspension.
The BOLA is assembled, planted, and balanced before being raised to the final hanging point.
Place the water-level indicator and the removable plant liner correctly in the outer shell.
Secure all three cables at the designated points and check that they have equal tension.
Cover the bottom of the plant liner with the provided LECHUZA-PON, place the plant, and fill with suitable substrate with even weight distribution.
Water the substrate from above for about 12 weeks. After rooting, fill from the ring to the MAX and maintain the appropriate dry phase at MIN.
The symmetrical spherical form has no “back” side. Since the suspension allows free rotation, the transition from the smooth upper part to the grooved lower shell remains seamless from every angle.
BOLA is designed to be hung from the ceiling or another suitable overhead structure. It is not a tabletop planter and should not be used resting loosely on a surface.
The components of the planter and the suspension system are included in the packaging.
Not included the plant, additional substrate, and the suitable ceiling hook or balcony bracket, wall plug or other mounting hardware for the supporting structure.
Both sizes are available in the same three color options.
Clean the smooth and grooved sections with a soft, slightly damp cloth. Avoid hard brushes, abrasive sponges, and strong cleaners that may damage the matte surface.
In an indoor or fully sheltered location, the plug remains properly closed. In an uncovered outdoor area, it opens so that the integrated overflow drains away excess rainwater.
Use appropriate mounting hardware for the ceiling or structure — not included — and if in doubt, have the installation done by a professional. Do not hang it over a walkway or in a place accessible to children. Allow it to rotate freely, regularly check the mounting, the rotating head, and the three cables, and do not use a worn system. Outdoors, install only in a wind-protected location and take it down in strong wind or storm. Do not exceed a total load of 3.5 kg on the BOLA 23 or 8.5 kg on the BOLA 32.
The BOLA 23 has dimensions Ø23 × 18 cm, total height 62 cm with suspension, water reservoir 0.7 L, plant volume 1.2 L, and plant liner approx. Ø12 cm. The BOLA 32 has dimensions Ø32 × 25 cm, total height 66 cm, water reservoir 2 L, plant volume 3.1 L, and plant liner approx. Ø17 cm.
Includes the BOLA Color outer shell with bottom plug, the removable plant liner, the MIN/MAX water-level indicator, LECHUZA-PON, and the stainless steel suspension with rotating head and three cables. The plant, additional substrate, and mounting material for the ceiling or structure are not included.
The open ring is located between the smooth top section and the grooved bottom shell. You pour water from any easily accessible point, and it is directed into the reservoir without needing to move dense foliage.
Yes. The plant, LECHUZA-PON, and substrate are in a separate plant liner, which can be lifted from the outer shell for easier repotting, inspection, and maintenance.
No. For about 12 weeks, water the substrate from above until the roots reach the moisture zone. After rooting, fill from the perimeter ring up to MAX, and when the indicator reaches MIN, allow the appropriate dry phase before refilling.
Yes, in a wind-protected location. In an uncovered outdoor area, open the lower drain plug so the overflow can operate, and take down the BOLA in strong winds or storms. Leave enough clearance for it to rotate without striking nearby objects.
The total load must not exceed 3.5 kg for the BOLA 23 and 8.5 kg for the BOLA 32, including the planter, plant liner, PON, substrate, plant, and water. The balcony bracket or other structural mounting hardware is not included: it is chosen according to the ceiling or structure and must be checked regularly along with the rotating head and the three steel cables.
© Original product description by Greenleaf Garden Center. All rights reserved. Copying is prohibited.