Ceramic presence
The glossy wood-look surface and black interior create a warm, clean contrast around the plant.
Bali 13 Ceramic (E9102)
Normal price
€8,00
Bali 13 Ceramic (E9102)
Ceramic outer pot with no drainage hole, for the Hydroponic Pot 11/09, II/9VE indicator or a soil-grown nursery pot.
- Wood-look · glossy finish
- Ø 13 × H 10.5 cm
- Hydroponic Pot 11/09
- Closed, watertight base
Bali 13 Ceramic (E9102) combines the presence of ceramic with a clean, functional base for the plant. The glossy wood-look surface and black interior create a warm, clean contrast around the plant. In hydroculture it works with the Hydroponic Pot 11/09 and Pegulator II/9VE, keeping roots in the slotted culture pot while the water level remains easy to monitor without improvised sizing.
Ceramic outer pot · aerated roots · visible level
The correct combination for the 11/09 system
Bali is the closed outer pot that holds the controlled water reserve. The Hydroponic Pot 11/09 supports the plant and LECA, while the Pegulator II/9VE displays MIN, OPT and MAX.
- The actual outside dimensions are Ø 13 × H 10.5 cm.
- The compatible Hydroponic Pot 11/09 (P5310) has the correct depth for the II/9VE indicator.
- The hand-finished surface may show small natural variations in tone and pattern.
Important compatibility note. Choose the indicator by the depth of the Hydroponic Pot 11/09, not by the outside height of the ceramic pot. This combination uses the II/9VE (P6226).
Verified 11/09 fit
The Hydroponic Pot 11/09 and II/9VE match this specific Bali size.
Two ways to use it
Use it as a hydroculture outer pot or with a separate soil-filled nursery pot that has drainage holes.
CompatibilityThree parts with distinct rolesBali 13, Hydroponic Pot 11/09 and II/9VE.
The exact 11/09 combination
The outer pot holds the water, the slotted culture pot supports roots and LECA, and the indicator makes the level visible.
Bali 13
Ceramic body, Ø 13 × H 10.5 cm, with no drainage hole, product code E9102.
Hydroponic Pot 11/09
The slotted P5310 pot supports the roots and growing medium.
Pegulator II/9VE
Ø 20 mm × H 147 mm, product code P6226.
The verified culture pot for this size.
Its height matches the depth of the culture pot.
Similar numbers do not guarantee the same fit or an accurate reading.
SetupFour clear stepsFrom rinsing the LECA to the first OPT reading.
Set up without compressing the roots
Prepare the culture pot outside the ceramic outer pot and place the assembly inside only after the roots are supported correctly.
Rinse the pot and LECA
Remove fine dust until the rinse water runs clear.
Fit the indicator
Fit the Pegulator II/9VE in its correct position before adding all the growing medium.
Support the roots gently
Add LECA around the roots without heavy pressure or blocking the slots.
Place inside and fill to OPT
Lower the pot into the ceramic outer pot and add water slowly while watching the indicator.
MAX is not the everyday target
For routine care, fill to OPT, let the level fall and adjust refilling to the plant and conditions.
Technical & careMaterial, dimensions and contentsWhat to know before choosing.
Ø 13 × H 10.5 cm
Ceramic outer pot with a wood-look finish and black interior, with no drainage hole.
Watertight outer pot
Designed to hold the system's controlled reserve or protect the surface when used with a soil-grown nursery pot.
Gentle cleaning for the ceramic finish
Clean without abrasives and handle the pot carefully to avoid chips and knocks.
Use lukewarm water, a soft cloth and, when needed, a little mild soap.
Avoid abrasive pads, strong solvents and sudden temperature changes.
During periodic cleaning, remove the inner pot, discard old water and rinse the base.
In the box
1 Bali 13 Ceramic (E9102)
One ceramic outer pot, product code E9102.
Not included
Hydroponic Pot, indicator, LECA and plant
The Hydroponic Pot 11/09, Pegulator II/9VE, LECA and plant are sold separately.
Complete the 11/09 system
Open the correct culture pot, matching indicator, every available LECA option and the approved Hydroculture Guide.
Hydroponic Pot 11/09
The slotted P5310 culture pot for this ceramic size.
View product
Pegulator II/9VE
The Ø 20 mm, 147 mm high version matched to this setup.
View the indicator
LECA for Hydroculture
Browse every available grade and choose the one that suits the roots and openings of the culture pot.
View all LECAHydroculture Guide
Approved core guidance for LECA, water level, plant transfer and maintenance.
Open the guideFrequently asked questions
Concise answers on compatibility, use and box contents.
01What exactly is included?
It includes one Bali 13 Ceramic (E9102) ceramic outer pot. The Hydroponic Pot, indicator, LECA and plant are sold separately.
02Which culture pot fits?
The verified match is the Hydroponic Pot 11/09 (P5310).
03Which water-level indicator is correct?
Pegulator II/9VE (P6226), Ø 20 mm and 147 mm high.
04Does it have a drainage hole?
No. The closed base holds the controlled water reserve when used as a hydroculture outer pot.
05Can it also be used with soil?
Yes, as an outer pot with a separate inner nursery pot that has drainage holes. Water outside the ceramic pot and allow it to drain thoroughly.
06Why can the finish vary slightly?
The hand-finished surface may show small natural variations in tone and pattern.
07How should it be cleaned?
Use a soft cloth, lukewarm water and mild soap when needed. Avoid abrasives and knocks.
08How far should I fill the water?
For routine care, fill to OPT. MAX is intended for limited, temporary use and not as a permanent level.
© Original product description by Greenleaf Garden Center. All rights reserved. The text and diagram are original Greenleaf material; copying is prohibited.